Filter projects by type: : All

Filter projects by status All

 

Search



Innocond - development of innovative sustainable materials to improve thermal insulation in construction

this entry has 0 Comments
in Projects

The INNOCOND project aims to research and develop innovative renewable and recyclable materials, with high thermal insulation, high mechanical resistance and low density, intended for rehabilitation and construction (both traditional and bio-construction, passive construction and bioclimatic construction).

 

Interbot - development of an hmi interface for programming robots using verbal commands and artificial vision

this entry has 0 Comments
in Projects

The tendencies towards the manufacture of a wide variety of products in smaller and smaller batch sizes (product customization) implies the need to readjust the productive means very frequently to each type of product. Although robots are very flexible equipment, their ...

 

Recibat - methodology for sustainable recycling of metals contained in lithium batteries

this entry has 0 Comments
in Projects

The RECIBAT project aims to define and develop a competitive methodology for the treatment and recovery of the main metals (Li, Co, Ni, Mn) contained in a lithium battery. This will involve the selection of cathode materials, design and testing of ...

 

Sensoestant- development of prototypes based on sensors to increase safety in the use of furniture with drawers, shelves and elements hanged on walls

this entry has 0 Comments
in Projects

AIDIMME will develop, during the SENSOESTANT project, systems that allow the safe use of furniture with drawers, shelves and elements hanging on the walls, using sensor-based technology, without modifying the design or materials of the furniture. These devices, on the one ...

 

Digituin - development of a digital infrastructure for the construction of process models using digital twins

this entry has 0 Comments
in Projects

Digital Twins (DT) are virtual and dynamic representations of systems, products or services that allow simulating, with a greater or lesser degree of detail, their behavior even before they physically exist. To create these virtual representations, the cause-effect relationship between the ...

 

Agroforef - obtaining chemical compounds from agroforestry waste through bio-refining processes for use in the wood, furniture and construction industry

this entry has 0 Comments
in Projects

During the realization of the AGROFOREF project, the revaluation of certain by-products of the agri-food and forestry industry will be investigated in order, through different biorefining techniques, to obtain bio-products that have properties of interest to the industry and, especially, to ...

 

Filtair - sanitizing surface for indoor air treatment

this entry has 0 Comments
in Projects

The FILTAIR project will generate metallic and polymeric surfaces with sanitizing properties which can be applied directly to novel indoor air purification systems. The new system will have a two-stage disinfection, the first consists of a nanostructured photocatalyst that can eliminate ...

 

Airluisa - avi advanced system for integral monitoring of emissions and air quality in urban environments in the valencia region

this entry has 0 Comments
in Projects

The overall challenge of AVI airLUISA is to comprehensively develop joint solutions based on big data tools to the challenge of monitoring GHG emissions (CO2-eq) and other pollutant emissions (SO2, NOx, O3, PM-10, PM-2.5), in order to rigorously assess air quality ...

 

Development of surfaces with bactericidal and virucide functionality

this entry has 0 Comments
in Projects

Viricidal substances for SARS-CoV-2 based on prior knowledge of antimicrobial and bactericidal materials will be developed during this project. Thanks to this, the material itself will degrade the virus, preventing it from being infective and cutting the chain of contagion. Using ...

 

Circular economy applied to waste treatment

this entry has 0 Comments
in Projects

Design of proposals to evaluate the integration of the circular economy in the field of high impact waste treatment such as electronic waste or sludge contaminated with metals.

 

Visionar - autonomous processes capable of managing the manufacturing flow with minimal external interventions.

this entry has 0 Comments
in Projects

The objective of the project is oriented towards obtaining autonomous processes that are capable of managing the manufacturing flow with minimal external interventions. In this case, automation is based on the use of robots, and the autonomy of the process derives ...

 

Research and development of porous materials

this entry has 0 Comments
in Projects

Materials with high porosity have a large amount of air in their structure and are widely used in applications such as thermal insulation, acoustic absorption or as part of composite materials. The correct characterization of these materials for a given application ...

 

Recufad - coating and functionalization of polymeric structures obtained by additive manufacturing technologies

this entry has 0 Comments
in Projects

Provide specific functionalities to polymers used in additive manufacturing using SLS (Selective Laser Sintering) technology. To achieve this, two functionalization alternatives are proposed: - Additivation of the polymer powder used as raw material - Surface activation of the manufactured part and subsequent functionalization The ...

 

Airtox - control of emissions in the air and reduction of toxicity in habitat materials

this entry has 0 Comments
in Projects

This project presents a study on the reduction of VOC emissions from products and materials. In this sense, controls will be established for air emissions and migrations on food contact surfaces. In turn, we will study the toxicity of fumes in ...

 

Transvac - desarrollo de protocolos de embalaje, almacenaje y transporte de productos farmacéuticos.

this entry has 0 Comments
in Projects

The pharmaceutical sector works with very high quality standards for its products. However, there are two other fundamental factors such as packaging systems and distribution, which are not yet at the same level of control. This project aims to investigate the packaging ...

 

Sispatint 2021 testing, configuration and improvement of the patint system, and study and analysis of biomaterials

this entry has 0 Comments
in Projects

Within AIDIMME's Biomaterials R&D line, the SISPATINT 2001 project includes several applied research activities to test, configure and improve the PATINT system, as well as activities for the study and analysis of biomaterials. The innovative PATINT system is an advanced tool for ...

 

Industrial symbiosis observatory in valencian community

this entry has 0 Comments
in Projects

The Industrial Symbiosis Observatory is a tool for technology transfer and Competitive Intelligence addressed to collecting, filtering and disseminating relevant information about IS practices, so it assists Valencian firms in their road to implementation.

 

Ecomarsi - development of sustainable consumer products: circular economy, environmental marking and industrial symbiosis in promoting sectors of the valencian community

this entry has 0 Comments
in Projects

The project EcoMARSI aims to develop sustainable consumer products applying the concepts of Circular Economy and Industrial Symbiosis. For this, different secondary raw materials (oxides and metals of Zn and Cu) will be obtained, through innovative technologies, from waste and wastewater ...

 

Development of prefabricated and high sustainability construction elements

this entry has 0 Comments
in Projects

The Technological Institute (AIDIMME) is carrying out the project entitled Development of prefabricated and highly sustainable construction elements - PRESOST -, aimed at researching and materializing prefabricated elements for construction, mainly made with materials of natural origin and rapid renewal or ...

 

Infuri - innovation in the furniture industry in the era of circular economy

this entry has 0 Comments
in Projects

The EU furniture industry is a labour-intensive sector dominated by SMEs, which is facing nowadays different challenges such as increasing competition from countries with lower production costs, increasing raw materials and labor costs, an aging workforce and difficulties in attracting younger ...

 

Smartrain. bridging pivotal competencies from vet curricula to co-creation in furniture design

this entry has 0 Comments
in Projects

SmarTrain joins VET providers and Research and Technology Organisations from the Woodworking and Furniture Manufacturing Industries to challenge and broaden the horizons of European VET systems. The project will detect the core changes required to include new SKCs (Skills, Knowledge and ...

 

Circulatool-tool for improving the circularity level of companies in the furniture-metal sector.

this entry has 0 Comments
in Projects

his project is aligned with a line of research that is being followed in AIDIMME, focused on making available to companies tools to allow them to carry out actions towards a circular economic model. CIRCULATOOL proposes the creation of a tool ...

 

Development of paints with antifungal properties through the addition of biocides of natural origin

this entry has 0 Comments
in Projects

The project FUNGISTOP will develop paints that are characterized by maintaining hygienic indoor environments through the application of biocides that limit the development of fungi. The biocides used will be of natural origin in order to preserve the environment, from two ...

 

insertag - design and development of an individual identification system of parts in the manufacturing process

this entry has 0 Comments
in Projects

This project arises as a consequence of the IDENTAG project, the result of which is the design of an identification element based on radio frequency, so that it can be inserted or adhered to pieces of board or composite materials of ...

 

Nanostructured and mesostructured coatings for prostheses based on anodization and sol-gel coatings

this entry has 0 Comments
in Projects

In this research project, nanostructured and mesostructured coatings will be developed on Ti-6Al-4V alloys, which is the material most widely employed for the fabrication of prostheses due to its corrosion resistance, good mechanical properties and optimal biocompatibility. 2.5 million hip and ...

 

Ricorr- corrosion indicating coatings

this entry has 0 Comments
in Projects

A coating that indicates visually the onset of corrosion on coated metals will be developed. To achieve this aim, microcapsules and mesoporous silica particles with dyes in their interior will be synthesized and incorporated in the coating. Microcapsules will release the ...

 

Restructmad - research and development of innovative solutions for repair and reinforcement for wood structures

this entry has 0 Comments
in Projects

The project intends to research and develop innovative solutions to repair and reinforce wooden structures, with substantial improvements over existing ones: greater resistance and bearing capacity, lower environmental impact, lower cost and use of materials, shorter execution time, direct application ...

 

Development of devices to help the prone position

this entry has 0 Comments
in Projects

Patients with severe pneumonia due to COVID, may develop a severe lung dicease similar to Acute Respiratory Distress Syndrome (ARDS), requiring more intensive support from their supplemental oxygen therapy, and orotracheal intubation and mechanic ventilation. This intubation is also associated with ...

 

Packbest – research of the influence of the flute profile in the corrugated board packaging behaviour under transport operations

this entry has 0 Comments
in Projects

Corrugated board packaging is extensively used by almost all industrial sectors for handling, transport and stacking operations. Compared to other materials paper based packaging represents the 35% of the whole market. Besides experts estimate a continuous growth in its demand between ...

 

Wall4wood

this entry has 0 Comments
in Projects

In the present research project, it is expected to develop hydrophobic coatings on structural wood to partially or completely prevent the absorption of moisture by the wood. These coatings willbe developed by using silica sol-gel technology. In addition, the hjydrophobic coatings ...

 

Gyroscope - development of prototypes based on gyroscopic principles to reduce the risk of tipping on stairs and furniture elements with low stability

this entry has 0 Comments
in Projects

The project will provide our companies with products to increase the stability of stairs and furniture elements of an unstable nature (highchairs, stools, high tables, etc.), using technology based on gyroscopic properties, without modifying the design or the materials of such ...

 

Colearning-desarrollo de técnicas de aprendizaje de tareas para cobots basadas en interacción humana y algoritmos de aprendizaje de refuerzo (colearning)

this entry has 0 Comments
in Projects

En términos generales, la programación de robots se ha simplificado mucho en los últimos años. Los fabricantes han desarrollado herramientas gráficas y métodos gestuales que facilitan la generación de programas en cualquier tipo de robot. Obviamente, cada programa es válido en ...

 

Iproduce - a social manufacturing framework for streamlined multi-stakeholder open innovation missions in consumer goods sectors

this entry has 0 Comments
in Projects

Democratized innovation holds undeniable promise for European producers, but the integration with corporate innovation practices is in its infancy. While the interest is real, it is still neither easy or efficient for producers – especially SMEs to benefit from collaborative production. ...

 

Development of adhesives and paints for the footwear and furniture sector from co2 from industrial facilities of the valencian region

this entry has 0 Comments
in Projects

PUCO2 is a project in collaboration with the AIMPLAS, INESCOP and ADIMME technology centers, as well as a series of tractor companies in the Valencian Región that maintain an increasing interest in their CO2 emissions and their use. In this sense, ...

 

Symbinet-portal iniciativas de simbiosis industrial

this entry has 0 Comments
in Projects

The project aims to develop an intelligent digital ecosystem portal / prototype to promote Industrial Symbiosis Initiatives in companies in the Valencian Community, as one of the key tools to support the Circular Economy.

 

Development of an ecodesign collaborative platform for the urban furniture sector

this entry has 0 Comments
in Projects

The PLACE project - Ecological Purchase Platform / Ecodesign Collaborative Platform – consists in the development of a collaborative platform that encourages GREEN PROCUREMENT and facilitates the incorporation of these environmental requirements –a through ecodesign- in companies. The introduction of ecodesign ...

 

---

this entry has 0 Comments
in Projects

---

 

Gva mat0 - matlig 2020 - development and applications of lightweight materials and new materials

this entry has 0 Comments
in Projects

Interstitial condensation, which is produced inside a material or enclosure, is a source of various building pathologies. This depends on the amount of water vapour that passes through the material, its temperature gradient, its nature and the arrangement of the different ...

 

Gva sur0 - smartcoating - smartcoatings preparation solutions

this entry has 0 Comments
in Projects

During the realization of this project, the aim is to study and identify solutions and technologies associated with the field of smart coatings. On the one hand, the encapsulation, in silica nanocapsules, of an additive indicator of corrosion for sol-gel coatings applied ...

 

Redfor-research in new technologies for the reduction of formaldehyde emissions

this entry has 0 Comments
in Projects

Formaldehyde is a volatile organic compound with proven carcinogenic properties for humans. Although naturally present in the atmosphere, man-made emissions of this compound can endanger health. Because of this, the reduction of these emissions is proposed in different laws, until ...

 

Circularize-design and development of a diagnostic tool and improvement of the level of adaptation to the circular economy model for companies of the furniture-metal sector.

this entry has 0 Comments
in Projects

 

Development of a methodology for non-destructive testing of timber and innovative application to rehabilitation

this entry has 0 Comments
in Projects

The project aims to develop a non-destructive analysis methodology that allows to know the state and structural quality of current and old timber, in order to be able to carry out rehabilitations of wood structures in less time, in a competitive, ...

 

Fotografeno. design of a high performance catalytic reactor based on graphene and doped photocatalytic oxides for the treatment of refractary contaminants in waters

this entry has 0 Comments
in Projects

A photocatalytic reactor prototype will be designed based on the catalysts developed in this research project (TiO2 and ZnO nanoparticles doped with metallic ions (M) and supported on reduced graphene oxide (RGO)). Doping with metallic ions reduces the bandgap and prolongs ...

 

Smart maintenance system based on the real status of the equipment

this entry has 0 Comments
in Projects

The final objective of the project is to develop an intelligent system for analyzing the operation of two specific classes of machines (printing presses and automatic lathes), based on the real-time information provided by a set of sensors that measure various ...

 

Insylay 3 industrial symbiosis layer at industrial zones

this entry has 0 Comments
in Projects

The INSYLAY project aims to implement sustainable cooperation models between industrial companies, in order to obtain a more efficient production and lower environmental impact, by applying a methodology based on the concept of industrial symbiosis. This methodology will be materialized in a ...

 

Cu-ni-cr- modifications on the coating process cu / ni / cr or cu / ni to improve the adherence properties

this entry has 0 Comments
in Projects

This project is mainly focused on the experimental development of a possible alternative method for the sub-stage of biting of polymeric materials, prior to the deposition of metals, by chemical route, on these materials. This experimental development will be based on ...

 

Ondubest- research of the influence of flute profile in the strength behaviour and properties of corrugated board

this entry has 0 Comments
in Projects

Corrugated board packaging is extensively used by almost all industrial sectors for handling, transport and stacking operations. Moreover there is a la lack of updated works to correlate both fluting paper characteristics and flute profile with the final properties of corrugated board ...

 

Protegel - development of antimicrobial coatings based on silver nanoparticles on titanium alloy used in prostheses

this entry has 0 Comments
in Projects

In the present research Project, the development of antibacterial coatings on Ti-6Al-4V is aimed. The most used material for the fabrication of prostheses is the Ti-6Al-4V alloy due to its corrosion resistance, good mechanical properties and good biocompatibility. 2.5 million implants ...

 

Compensated shape. evaluation and reduction of deformations in additive manufacturing parts by compensated shape

this entry has 0 Comments
in Projects

The main objective of this project is to determine the method or process that must be used to eliminate or mitigate the deformation that occurs in additive manufacturing processes. This project will evaluate the possibility of counteracting the effect of deformations during ...

 

Spanish forestry technology platform

this entry has 0 Comments
in Projects

Establish the technological development lines needed to consolidate the Spanish forestry sector as an organized, innovative and growing sector, capable of improving its economic and environmental performance, and to orient the sector towards more efficient and responsible production and consumption patterns.

 

Efpf - european connected factory platform for agile manufacturing

this entry has 0 Comments
in Projects

The eFactory project realises a federated smart factory ecosystem by primarily interlinking 4 smart factory platforms, from the FoF-11-2016 cluster, through an open and interoperable Data Spine. The federation of the 4 base platforms is complemented by industrial platforms, collaboration tools ...

 

Custodian - customized photonic devices for defectless laser based manufacturing

this entry has 0 Comments
in Projects

Different beam shaping technologies appeared in recent years enable to tailor energy delivery using a tailored spacial and temporal power distribution in laser beam. This makes possible to solve relevant metallurgical problems such as hot cracking in laser beam welding (LBW) ...

 

Fotografeno. design of a high performance catalytic reactor based on graphene and doped photocatalytic oxides for the treatment of refractary contaminants in waters

this entry has 0 Comments
in Projects

A photocatalytic reactor prototype will be designed based on the catalysts developed in this research project (TiO2 and ZnO nanoparticles doped with metallic ions (M) and supported on reduced graphene oxide (RGO)). Doping with metallic ions reduces the bandgap and prolongs ...

 

integration of advanced technologies to improve energy efficiency and processes in companies

this entry has 0 Comments
in Projects

With the rise of industrial digitalization, there are different technologies based on this concept that significantly improve both the efficiency of manufacturing processes and energy efficiency, in many cases in parallel. Most industrial companies are not aware of this type of technology, ...

 

Intelligent maintenance system based on the real state of the equipment

this entry has 0 Comments
in Projects

The project addresses a topic whose first approaches were made at the end of the 80s, when it began to talk about predictive maintenance. This discipline has evolved from the occasional measurement of the state of some variables from time to ...

 

Plasma - development of technology demonstration platforms for the smart factory

this entry has 0 Comments
in Projects

Design, development and application of demonstration cells of some of the technologies integrated in the standard model of Industry 4.0, which can be adopted in the short and medium term by the industrial companies of the Wood-Furniture and Metal-mechanic sectors after ...

 

Inex-adam - increasing excellence on advanced additive manufacturing

this entry has 0 Comments
in Projects

Main goal of the INEX-ADAM project is to reduce networking gaps and deficiencies among UNIZAG FSB and internationally leading EU institutions, by significantly strengthening the excellence and innovative capacity for research in the field of Additive Manufacturing (AM) within the Centre ...

 

monitoring processes and activities in industrial processes

this entry has 0 Comments
in Projects

The digitization of manufacturing processes in the manufacturing industry allows valuable information to reduce process costs, improve productivity, increase quality level, reduce maintenance costs, etc. There are different software tools such as MES or SCADA that allow real-time management of process ...

 

Ergo 4.0 - development of new seating furniture customizing systems with a comfort index tailored to each user

this entry has 0 Comments
in Projects

When buying ergonomic furniture, the consumer use to be overwhelmed with the high number of products that are said "ergonomics". However those products use to have only a little objective information. It is necessary that the furniture manufacturers think on the ...

 

Fotografeno. design of a high performance catalytic reactor based on graphene and doped photocatalytic oxides for the treatment of refractary contaminants in waters

this entry has 0 Comments
in Projects

The main objective of the project is to develop a PEM electrolyzer of low power (1kW) and competitive cost for the generation of high purity hydrogen (99,99%) and at high pressure (>15 Bar). The strategies to achieve this goal are centered ...

 

2018 research and development action plan

this entry has 0 Comments
in Projects

The initiative addresses different independent R+D activities: -Water and waste treatment -Additive manufacturing -Development and optimization of product -Industry 4.0 -Advanced materials applications -Modified surfaces -Toxicity of materials -Packaging systems -Dissemination of research results -Knowledge transfer

 

Eosc-hub integrating and managing services for the european open science cloud

this entry has 0 Comments
in Projects

The EOSC-hub project creates the integration and management system of the future European Open Science Cloud that delivers a catalogue of services, software and data from the EGI Federation, EUDAT CDI, INDIGO-DataCloud and major research e-infrastructures. This integration and management system ...

 

Eq-wood quality qualifications for the european woodworking and furniture industry

this entry has 0 Comments
in Projects

The project EQ-WOOD tackles innovation capacity and competitiveness of EU wood and furniture industry by designing and delivering the curriculum of Innovation Advisor in the Wood and Furniture Industry. It helps managing innovation by merging green, digital and marketing skills, and ...

 

Life-2-acid

this entry has 0 Comments
in Projects

The aim of LIFE-2-ACID project is to demonstrate a new technology that allows the selective recoveryof metal zinc and iron chloride from Spent Pickling Acids (SPAs) generated in galvanizing processes, thus minimising their environmental impact. The project will demonstrate the feasibility of a ...

 

Digital innovation in the wood and furniture value chain and business impact: development of connected industry 4.0 applied demos

this entry has 0 Comments
in Projects

MODELSINC's aim is fostering digitalization in wood and furniture industries. For this purpose, the project actions are addressed to the design and development of digital solutions for production control processes and automation of orders in the client-supplier relationship. Systems of Product-Services ...

 

Fotografeno. design of a high performance catalytic reactor based on graphene and doped photocatalytic oxides for the treatment of refractary contaminants in waters

this entry has 0 Comments
in Projects

A photocatalytic reactor prototype will be designed based on the catalysts developed in this research project (TiO2 and ZnO nanoparticles doped with metallic ions (M) and supported on reduced graphene oxide (RGO)). Doping with metallic ions reduces the bandgap and prolongs ...

 

Ergo 4.0 - development of new seating furniture customizing systems with a comfort index tailored to each user

this entry has 0 Comments
in Projects

When buying ergonomic furniture, the consumer use to be overwhelmed with the high number of products that are said "ergonomics". However those products use to have only a little objective information. It is necessary that the furniture manufacturers think on the ...

 

Integration of advanced technologies to improve energy efficiency and processes in companies

this entry has 0 Comments
in Projects

With the rise of industrial digitization, there are different technologies based on this concept that significantly improve the efficiency of manufacturing processes, as well as energy efficiency, often in parallel. Most industrial companies are not aware of these types of technologies, nor ...

 

Mend-me - development of a methodology of non-destructive evaluation for timber and innovative application to rehabilitation of buildings

this entry has 0 Comments
in Projects

The project aims to develop a non-destructive analysis methodology that allows to know the state and structural quality of current and old timber, in order to be able to carry out rehabilitations of wood structures in less time, in a competitive, ...

 

Custom on body

this entry has 0 Comments
in Projects

The project will develop a design methodology for the custaomization of products adapted to the morphological varaibility of the population, through flexible manufacturing technologies.

 

Nanoh2o - desarrollo de nuevos sistemas de depuración fotocatalítica de aguas residuales mediante la utilización de nanocompuestos reutilizables

this entry has 0 Comments
in Projects

El proyecto se centra en el desarrollo de nuevas técnicas de depuración fotocatalítica de aguas mediante la utilización de nanomateriales recuperables y reutilizables basados en nanopartículas con efecto fotocatalítico. Para probar la efectividad de los nanocompuestos sintetizados se ha seleccionado contaminantes ...

 

Advanced productivity efficiency systems for industry 4.0

this entry has 0 Comments
in Projects

SAIN4 is a project funded by the Valencian Institute for Business Competitiveness (IVACE) and the European Union through the European Regional Development Fund (FEDER). This project aims to develop an Advanced Management System that allows companies in the Wood-Furniture and ...

 

Monitoring processes and activities in industrial processes

this entry has 0 Comments
in Projects

One of the problems that must be faced in the measurement of the state of the processes in real time is the identification and obtaining of the relevant data of each one of the machines that take part in the manufacturing ...

 

Morpheos - morphotype ecosystem – design remote definition based on big data morphology and use ecosystem for creative industries

this entry has 0 Comments
in Projects

To create in the European Union a centralized open ecosystem based on consumer morphology and preferences where creative enterprises can have access to knowledge about customers expectations and need (“customization knowledge” in the following) to enhance their creativity and design processes. ...

 

Mimwood - development of a monitoring system for vet centres

this entry has 0 Comments
in Projects

This MIMwood project aims to generate study methodologies and tools that facilitate centers of vocational training in wood and furniture choosing and selecting innovative materials. Many of these new materials can be used in the furniture sector, but are not included ...

 

Nimble - collaboration network for industry, manufacturing, business and logistics in europe

this entry has 0 Comments
in Projects

NIMBLE will develop the infrastructure for a cloud-based, Industrie 4.0, Internet-of-things-enabled B2B platform on which European manufacturing firms can register, publish machine-readable catalogs for products and services, search for suitable supply chain partners, negotiate contracts and supply logistics, and develop private ...

 

Human manufacturing

this entry has 0 Comments
in Projects

To create a healthy workplace and increase the competitiveness of the manufacturing firms, the creation of an optimal environment for human automation integration and cooperation that harnesses and supports the workers’ capabilities is needed.The HUMAN project,with 12 partners from 6 European ...

 

"renew2020 - youth training course for creative waste recycling"

this entry has 0 Comments
in Projects

ReNew 2020 idea is to put together educational, business and professional institutions with specific expertise in the field of youth training, in the waste collection and storage (solid waste, wood materials and fabrics) and in the interior design. Partners will bond ...

 

Life empore - life15 env/es/000598 development of an efficient and sustainable methodology for emerging pollutants removal in wwtps

this entry has 0 Comments
in Projects

The LIFE EMPORE project will demonstrate an innovative, cost-efficient and highly replicable technology for the removal of Emerging Pollutants from urban wastewater. For this purpose, a pilot plant is due to be designed and it will be integrated into the WWTP ...

 

Shcity-smart heritage city

this entry has 0 Comments
in Projects

SHCITY tackles the challenge of the creation of an open source tool to manage historic city centres and facilitate this task to the local authorities and help them to take the more right decision as far as management of the old ...

 

Tris - transition regions towards industrial symbiosis

this entry has 0 Comments
in Projects

Industrial Symbiosis (IS) is a building block of the Circular Economy, a means to sustainable growth increasing resource efficiency and SMEs competitiveness and resiliency (COM(2014) 398 final/2). Despite the acknowledged advantages, IS is not yet fully widespread. The challenge TRIS is facing ...

 

Nanotun3d - development of the complete workflow for producing and using a novel nanomodified ti-based alloy for additive manufacturing in special applications

this entry has 0 Comments
in Projects

NANONTUN3D will take advantage of the possibilities of Additive Manufacturing (AM) together with the development of a specially tailored Ti- based nano-aditived material to achieve dramatic improvements in structural parts of aero, space, mobility, and equipment sectors, reaching expected savings between ...

 

Eurojoiner mobility of wood workers joiners/carpenters across europe

this entry has 0 Comments
in Projects

In the last years, according to European regulations and recommendations, in each European country the corresponding National Qualifications System has been different, not always having enjoyed the same result in the country, because the methodologies used and developed have not been ...

 

Woodual wood sector and dual learning for youth employment and skills

this entry has 0 Comments
in Projects

The project aims at proposing an integrate and complete strategy for improving youth employability and a better school-to-work-transition. In particular, the project will foster the collaboration between VET institutions and employers in the wood and furniture sector, contributing to adapt ...

 

Generation of an innovative line of veterinary implants manufactured using titanium 3d printing additive technologies.

this entry has 0 Comments
in Projects

The project aims to generate an innovative line of veterinary implants manufactured using titanium 3D printing additive technologies. IMPLAVET will focus on the development and validation of two products. Hip prosthesis for dogs, which improves the quality of life of animals affected ...

 

Life in-brief - life14 env/es/000427 integrated business model for turning bio-waste and sewage sludge into renewable energy and agri-urban fertilizers

this entry has 0 Comments
in Projects

The LIFE In-BRIEF project aims to develop and implement a new business model for the resource-efficient management of certain biodegradable waste, increasing its use for bioenergy and in bioproducts.

 

Product-service symbiotic systems

this entry has 0 Comments
in Projects

Product-service solutions are not a novelty for manufacturing domain, in particular for Europe. The renaissance of EU industry in the global marketplace currently threatened by low-wages Countries is indeed closely related to our ability to provide customers with innovative, personalised and ...

 

Proinnomadera

this entry has 0 Comments
in Projects

The overall project objective is to identify and disseminate the potential of wood and biomass plantations in Valencia as well as to develop innovative products made from wood produced in plantations to improve the competitiveness of the wood & biomass sector, ...

 

Development of high anti-corrosive performance coatings of new generation, record

this entry has 0 Comments
in Projects

AIDIMME junto con el Grupo de Tecnología de Polvos de la UC3M y la empresa PINTURAS ISAVAL, S.L. están desarrollando recubrimientos con altas prestaciones anticorrosivas a través del proyecto de I+D+i: DESARROLLO DE RECUBRIMIENTOS DE ALTAS PRESTACIONES ANTI-CORROSIVAS DE NUEVA GENERACIÓN, ...

 

Furniture new skills

this entry has 0 Comments
in Projects

The development of the project is to define the different scenarios in which companies are going to find in the future, by analyzing and identifying the new skills required of the current and future workers, horizontal skills or specific skills to ...

 

Sustainable habitat. development and integration of solutions to improve environmental comfort

this entry has 0 Comments
in Projects

It is intended to carry out the design and development of solutions to improve environmental comfort (thermal, lighting and air quality) by integrating smart materials (active and passives) and sustainable solutions in domestic and public environments. The behaviour of materials and ...

 

Smart heritage buildings

this entry has 0 Comments
in Projects

The project intends to develop a preventive preservative system for heritage buildings and it requires of different developments referred to sensors, internet of things and cloud computing that will lead to new tools focused to control and decision taking.

 

Future internet technologies for manufacturing

this entry has 0 Comments
in Projects

The mission of the FITMAN project is, on one side, to provide the FI PPP Core Platform with a set of industry-led use case trials in the manufacturing domain, in order to test and assess the suitability, openness and flexibility of ...

 

New material based on advanced thermal formulation for its use in urban furniture, using micro/nanocapsules and change phase materials.

this entry has 0 Comments
in Projects

PCM is the acronym of Phase Change Materials. As it could be outlined from its name, they are materials that change their phase when external thermal action happens borrowing heat or liberating it in form of latent heat. These thermal advanced materials ...

 

“celluwood - materiales ecológicos laminados resistentes hechos de madera reforzada con celulosa”

this entry has 0 Comments
in Projects

Wood has evolved by natural selection to support the crowns of trees and to prevent the tree being killed or damaged by toppling in high winds. Humans have exploited timber as a natural resource, but in full acceptance that it did ...

 

Woodtech - promoción de la innovación para la mejora de la competitividad de la pymes en la industria maderera del espacio sudoe

this entry has 0 Comments
in Projects

WOODTECH is an innovation and technology transfer project that has the main objective of contributing to become the first and second wood transformation companies of SUDOE region more competitive in front of a global market; and to reinforce its developing capacity ...

 

Removal of hazardous substances in polyethylene packages using supercritical carbon dioxide(sc-co2) in recycling process

this entry has 0 Comments
in Projects

The high density polyethylene (HDPE) is widely employed for the manufacturing of packaging intended to be used in the transport and storing of hazardous and dangerous products. At the end of its life that kind of packaging becomes a hazardous waste ...

 

Motius. investigación y desarrollo de un prototipo de habitación infantil para la educación de la inteligencia emocional.

this entry has 0 Comments
in Projects

MOTIUS (Educational Furniture) is a research project for developing a children’s bedroom prototype for kids between 4 and 11. The prototype will assist parents in emotional intelligence educational purposes at home. The project will create an intelligent bedroom for interacting with ...

 

Investigacion y desarrollo de anclajes innovadores para construcciones temporales de madera

this entry has 0 Comments
in Projects

The main objective of the project is developing innovative mechanical joints specifically designed for timber elements and constructions to facilitate the mounting/assembly process, versatility and maintenance of temporary constructions with simple rectangular shapes or free and complex geometries. The final goal ...

 

Planet design - innovation through design for a competitive and sustainable society

this entry has 0 Comments
in Projects

The project Planet Design stems from the future and explicit needs of the European Wooden Furnishing sector, which are now recognised at all levels of the production chain. Innovating and differentiating the production offer are today the fundamental leverages for supporting ...

 

Development of innovative construction systems with glued laminated timber and glass

this entry has 0 Comments
in Projects

The project's goal is to develop an industrial and modular construction system for free forms with glued laminated timber and glass.

 

Development of solid biocombustibles based on forestry residues in the valencian community

this entry has 0 Comments
in Projects

The objective of the project BIOPELLETS is the development of solid biofuels value chain based on residual forest biomass from Valencian Community’s forests. This value chain includes the several steps of biomass processing, from forest to the consumer, taking into account ...

 

Business innovation and virtual enterprise environment /

this entry has 0 Comments
in Projects

EU needs an effective exit strategy from crisis: to this end innovation is a key issue for the EU industrial system. Innovation is a complex issue, requiring both special expertise and a large amount of knowledge. I.e., domain knowledge (on the ...

 

Imagine - innovative end-to-end management of dynamic manufacturing networks

this entry has 0 Comments
in Projects

Effective end-to-end management of Dynamic Manufacturing Networks (DMNs) is consistently touted as a top priority for manufacturing enterprises that need to strive to improve their efficiency, adaptability and sustainability of their production systems. IMAGINE aims to provide the first complete methodology ...

 

Development of design tools and prototypes of reconfigurable machines

this entry has 0 Comments
in Projects

The reconfigurable manufacturing is a new manufacturing paradigm that arose in response to emerging issues related to the rapid introduction of new products (wide variety), and the recent increase in the customization (low turnover). This type of system relies on manufacturing ...

 

Increase vocational skills to face earthquake risk inside of buildings

this entry has 0 Comments
in Projects

The project focuses on non-structural elements inside the buildings which are designed and done by the furniture manufacturers.

 

Tell me. technology enhanced learning livinglab for manufacturing environments

this entry has 0 Comments
in Projects

The TELL-ME project (Technology Enhanced Learning Livinglab for Manufacturing Environments) aims to develop and trial in authentic contexts (SME-driven human-centric and service-oriented manufacturing workplaces) an innovative cross-enterprise methodology and IT platforms for continuous education and training in heterogeneous business ecosystems, blending Precision ...

 

Industrial waste biomass implication as renewable energy source

this entry has 0 Comments
in Projects

Currently the residual waste coming from the furniture industrial sector are managed to be disposal or chipped to be reused in the same woodboard industry. in othe cases are thermally valorized inside the same companies. nowadays there is no classification and ...

 

Research of the position control of core-shell nanoparticles by means of magnetic fields

this entry has 0 Comments
in Projects

The main technologic challenge of nanoscience research in the material field is the effective way of add nanocompounds to materials, distributing them in the right way and avoiding the agglomeration in the application process. If the agglomeration occurs the new properties ...

 

New urban objects for smart cities: r&d of a smart urban object oriented to tourism

this entry has 0 Comments
in Projects

The overall objective of the project is the research and development of a prototype of urban object oriented to tourism, integrable in Smart Cities ICT platforms and in which smart materials derived from wood and ceramics are used.

 

Proinnomadera

this entry has 0 Comments
in Projects

The overall project objective is to identify and disseminate the potential of wood and biomass plantations in Valencia as well as to develop innovative products made from wood produced in plantations to improve the competitiveness of the wood & biomass sector, ...

 

Improving ipr management services to smes engaging in peer learning activities

this entry has 0 Comments
in Projects

Within the INPRO project, the involved partners wants to peer review IPR support programmes for SMEs in order to improve their knowledge and attitude towards this important topic as well as to transfer good practices into regional/national programmes. Using the Twinning Advanced methodology, the ...

 

Innourbe. desarrollo de productos de mobiliario urbano innovadores para ciudades inteligentes mediantes procesos de diseño creativo

this entry has 0 Comments
in Projects

INNOURBE aims to facilitating the exploration and exploitation of business opportunities regarding Smart Cities evolution. For that purpose, the Project develops conceptual prototypes of urban furniture. INNOURBE introduces disruptive innovation for urban furniture manufacturers. First of all, exploring new business opportunities ...

 

Nanolasur. development of new waterborne lasurs with high durability for exterior use based on nanotechnology.

this entry has 0 Comments
in Projects

The objective of this project is the development of new clear, pigmented and colourless, waterborne coating systems for wood, with high durability for exterior use. Clear colourless lasurs are highly demanded for its natural appearance and ease of application and ...

 

Sustainable habitat. development and integration of solutions to improve environmental comfort

this entry has 0 Comments
in Projects

It is intended to carry out the design and development of solutions to improve environmental comfort (thermal, lighting and air quality) by integrating smart materials (active and passives) and sustainable solutions in domestic and public environments. The behaviour of materials and ...

 

Habitrans-development of intermodal loading units for the transport of the habitat product mix, integrating elements of protection and devices smart for detection of breakage of product

this entry has 0 Comments
in Projects

The present project aims to solve the problems of the joint dispatch of the mix habitat products on a same intermodal loading unit. The mix of products of habitat includes the furniture, lighting, home textiles, and Ceramica sectors. With the present ...

 

Ovomax - online vocational training course on design, manufacture and validation if custom-made orthopaedic, oral and cranio-maxillofacial devices

this entry has 0 Comments
in Projects

Development of contents and implementation of an online free access course to assure Medical Device designers a worthy education and training along their professional career regarding design, manufacture and validation of custom-made medical devices is the main objective of OVOMAX ...

 

Prisma - creation of an integrated product for sensing, measuring, data acquisition and monitoring.

this entry has 0 Comments
in Projects

Development and deployment of a universal hardware and software tool, allowing real-time data acquisition of data that affects the behavior of products and facilities in service or that are needed in order to know or predict their behavior and anticipate problems ...

 

Hotcracking (ane)

this entry has 0 Comments
in Projects

In the project HOTCRACKING is intended to identify the conditions of processing and / or post-processing using technology of SLM (selective laser melting) to eliminate or mitigate the phenomenon of hot cracking.

 

Improvement of mechanical properties through thermal treatments on titanium alloys manufactured by electron beam melting

this entry has 0 Comments
in Projects

With the appearance of additive manufacturing, new materials of the same composition appear on the market as those made by conventional techniques but with totally different and unique mechanical properties and microstructure. The thermal treatments applied on conventional titanium alloys have ...

 

Precisión fa (ane)

this entry has 0 Comments
in Projects

The aim of the Project is to develop a system and the corresponding method for machining parts obtained by Additive Manufacturing able to remove material from both sides. The system and the method guarantee the position with precision of the parts ...

 

Experimental protocoles (protest)

this entry has 0 Comments
in Projects

Research projects often require measurements of specific properties which, by the nature of the materials and products, or the processes studied, are not satisfied by standard experimental procedures. This project defines test protocols for the 2016 AIDIMME projects related to additive manufacturing.

 

Desink - desarrollo de tintas funcionales basadas en micro y nanocargas para aplicación como recubrimientos en distintos sectores industriales

this entry has 0 Comments
in Projects

En las zonas con alto tránsito peatonal, zonas comerciales o públicas, se requieren materiales con elevadas prestaciones técnicas, especialmente de resistencia frente al desgaste. Actualmente existen suelos, tanto de cerámica como de materiales de madera que alcanzan ...

 

Collaborative robotics applied to shoe soles inyection and extraction process

this entry has 0 Comments
in Projects

Nowadays, shoe soles extraction process, after the injection in the mold, is manual, monoton and requires a great physical effort, which produces occasionally injuries to the workers. The automatization of these tasks require high adaptability because there are a lot of ...

 

New urban objects for smart cities: r&d of a smart urban object oriented to tourism

this entry has 0 Comments
in Projects

The overall objective of the project is the research and development of a prototype of urban object oriented to tourism, integrable in Smart Cities ICT platforms and in which smart materials derived from wood and ceramics are used.